Ready to speak to our Team?
Tel: 01473 830030
Email: info@tex-engineering.co.uk





Gas Meter Storage
Our Allied technical department will assist you in designing a cost effective solution for your gas meter storage enclosure requirements.
Material:
Our gas meter storage enclosures are manufactured in stainless steel. The product is finished in a two pack etch prime and are pure polyester leatherette powder coated in a standard colour of your choice, to give a hard wearing finish for outdoor use that requires minimum maintenance.
Mounting:
Gas meter storage enclosures can be wall mounted with internal or external fixings, post mounted with stainless steel posts of any height, floor mounted with or without root or subsurface mounted for pavement or road fittings. They can include special mounting plates with pre-punched holes and threaded bushes to ensure efficient assembly. Equipment mounting plates can be made from the material of our choice including: stainless steel, aluminium, zinc plated steel and exterior ply. They can be monobloc perforated (supplied complete with clip nuts) or treated with exterior ply to provide general purpose mounting plates.
Body:
Our gas meter storage enclosures can be made with a pitched or sloping roof with rain lip over the door(s) and internal or external wall fixings can also be supplied. Studs are fitted for equipment mounting plates and similarly, an earthing stud can also be provided. The enclosure can be single or double skinned with alternative venting styles to meet your needs.
Doors and Locks:
Doors can be fully gasketted to provide protection to an IP rating. There are many hinge variations that can be chosen to suit your requirements. Locks and hinges are made from aluminium and stainless steel. Similarly, padlock facilities are also made from stainless steel and welded to the enclosure.
Gland Plates:
Gland plates (gasketted if required) can be supplied.
Louvre’s:
Louvre’s with fly screen can also be supplied and incorporated to provide ventilation.
Other Attributes:
Many of our gas meter storage enclosures are installed in urban streets, therefore vandal resistant features are crucial for our products to function efficiently for years to come. Our design methods, materials and purpose built fittings provide enclosures which are also water and dust resistant.
Using our modern production facilities, we can supply a sample of purpose made enclosures very quickly. Production quantities can then be supplied with very short lead times. Our large range of standard enclosures are often available from stock.
Our design methods enable us to supply stainless steel purpose built enclosures for less than GRP and considered one of the best value for money products in the market.
Visit our specific product pages for more information about our Gas Storage services:
Gas Meter Storage – Models AKC 1 – 4
Product Attributes
- Stainless steel powder coated Green
- High and low ventilation louvres
- Floor or wall mounted
- Complete with plinth and fixings
Product Benefits
- Easily fitted using fittings provided
- Corrosion and vandal resistant
- Removable/lockable full size access panel
- Fitted with triangular lock and padlock hasp
- Designed to suit a variety of Governors models
- U16
- U25
- U40
- U65
Mechanical Data
MODEL | AKC1 | AKC2 | AKC3 | AKC4 |
METER SIZES | U16 | U16/25 | U40 | U65 |
INTERNAL HEIGHT (MM) | 700 | 900 | 1100 | 1460 |
INTERNAL WIDTH (MM) | 800 | 950 | 1230 | 1500 |
INTERNAL DEPTH (MM) | 400 | 550 | 770 | 600 |
DOOR OPENING (MM) HEIGHT | 650 | 850 | 960 | 1280 |
DOOR OPENING (MM) WIDTH | 750 | 900 | 1080 | 1350 |
Gas Meter Storage – Models AKL 1 – 3 & AKS 1
Product Attributes
- Stainless steel powder coated green
- Built -in vents:
- AKS1 – 1 vent
- AKL2 – 2 vents
- Side louvres
- 12mm exterior ply backboard
Product Benefits
- Hinged front
- Removable side panels
- Drop latch lock and key for high security
- Corrosion and vandal resistant
Mechanical Data
MODEL | AKS1 | AKL1 | AKL2 | AKL3 |
KIOSK HEIGHT (MM) | 1055 | 1160 | 1160 | 1160 |
KIOSK WIDTH (MM) | 500 | 700 | 700 | 565 |
KIOSK DEPTH (MM) | 315 | 315 | 415 | 490 |
INTERNAL WIDTH (MM) | 485 | 685 | 685 | 550 |
INTERNAL DEPTH (MM) | 275 | 275 | 375 | 450 |
Meter Kiosk AKJ 1 – 4
Product Attributes
- Stainless steel powder coated green
- High and low ventilation louvres
- Full size double hinged front doors
Product Benefits
- Twin triangular locks and key with padlock hasps
- Corrosion and vandal resistant
Additional Benefits:
- Plinths are available for model AKJ1-4
Mechanical Data
MODEL | AKJ1 | AKJ2 | AKJ3 | AKJ4 |
METER SIZES | U16/25 | U40 | U65 | U100/160 |
INTERNAL HEIGHT (MM) | 1200 | 1200 | 2100 | 2100 |
INTERNAL WIDTH (MM) | 1200 | 1500 | 1750 | 2500 |
INTERNAL DEPTH (MM) | 750 | 750 | 900 | 1100 |
Allied Kiosks offer a range of alternative dual purpose Combined Logger and Modem Kiosks.
We offer a full design and build service ensuring that we can enclose whatever Governor, Meter, Modem and Logger you need to house. Whether gas or water, we will have it covered.
Combined Logger and Modem Kiosk – AKLM1-3
Product Attributes
- 50mm ventilation seperated zone
- Stainless steel powder coated green
- Six approved glands and side louvres
- 12mm exterior ply backboards
- Two seperate compartments
Product Benefits
- Plinths available
- Standard drop latch lock and key
- Corrosion and vandal resistant
Mechanical Data
MODEL | AKLM1 | AKLM2 | AKLM3 |
KIOSK HEIGHT (MM) | 970 | 1120 | 1120 |
KIOSK WIDTH (MM) | 365 | 515 | 515 |
KIOSK DEPTH (MM) | 230 | 280 | 280 |
INTERNAL WIDTH (MM) | 355 | 505 | 505 |
INTERNAL DEPTH (MM) | 210 | 260 | 260 |
TOP SECTION HEIGHT (MM) | 370 | 520 | 250 |
BOTTOM SECTION HEIGHT (MM) | 510 | 510 | 780 |
EACH BACKBOARD SIZE (MM) | 350X330 | 500X480 | 500X230 & 500X600 |
PLINTH HEIGHT (MM) | 200 | 200 | 200 |
Comms and Solar Kiosk – AKTEC 1 and AKTEC 2
Product Attributes
- AKTEC1 Comms: Takes a LIN001 or JET001 barrier modem and isolation barrier unit
- AKTEC2 Solar: Takes a solar power battery and power regulation system
- AKTEC2: Takes both of the above
- AKN408A: An aluminium bracket, finished grey to mount the solar panels
Product Benefits
- Alternative combined unit available
- Wall mountable
- Stainless steel powder coated green
- Gasketed doors, screw fixings and padlock facility
- Designed for outdoor use
- Corrosion and vandal resistant
Mechanical Data
MODEL | AKTEC1 | AKTEC2 |
INTERNAL HEIGHT (MM) | 300 | 570 |
INTERNAL WIDTH (MM) | 230 | 250 |
INTERNAL DEPTH (MM) | 150 | 150 |
Logger Kiosk – AKTECDR
Product Attributes
- Stainless steel powder coated green
- Bracket for Technolog Newlog 4DR or 12mm back board (Exterior ply)
- Two standard triangular locks
- Recessed padlock facility
- Front or bottom entry
- Fixing kits available
Mechanical Data
KIOSK HEIGHT (MM) | 1250 |
KIOSK WIDTH (MM) | 130 |
KIOSK DEPTH (MM) | 90 |
INTERNAL HEIGHT (MM) | 530 |
INTERNAL WIDTH (MM) | 125 |
INTERNAL DEPTH (MM) | 70 |
Logger Kiosk – AKK1
Product Attributes
- High and low ventilation louvres
- Stainless steel powder coated green
- Supplied with post
- Drop latch lock and key
Product Benefits
- Houses all common loggers
- Corrosion and vandal resistant
Mechanical Data
KIOSK HEIGHT (MM) | 500 |
KIOSK WIDTH (MM) | 200 |
KIOSK DEPTH (MM) | 125 |
POST HEIGHT (MM) | 1200 |
POST WIDTH (MM) | 75 (SQ |
Underground Logger Kiosk – AKLB1
Product Attributes
- Stainless steel body
- Built in vent pipe and plastic tube
- 6mm aluminium treadplate lid
- Powder coated
- Takes standard meter box adaptor
Product Benefits
- Designed in conjunction with British Gas engineers to install water-resistant loggers (including the Technolog Newlog 4DR) underground.
- Standard triangular locks
- Corrosion resistant
- Fixing kits are available
Mechanical Data
KIOSK HEIGHT (MM) | 180 |
KIOSK WIDTH (MM) | 330 |
KIOSK DEPTH (MM) | 200 |
INTERNAL HEIGHT (MM) | 150 |
INTERNAL WIDTH (MM) | 290 |
INTERNAL DEPTH (MM) | 195 |
Instrument (Logger) Kiosk – Model AKI1 & AKI2
Product Attributes
- Stainless steel body
- Quality powder coated finish – green
- 12mm backboard – exterior ply
- Drop latch lock and key for high security
- Can be used to enclosure a variety of equipment
Product Benefits
- Designed to accept Newlog 4 & 4DR logger
- Corrosion and vandal resistant
Mechanical Data
MODEL | AKIP (POST) | AKI1 | AKI2 |
KIOSK HEIGHT (MM) | 1220 | 400 | 600 |
KIOSK WIDTH (MM) | 76 | 290 | 445 |
KIOSK DEPTH (MM) | 170 | 200 | |
INTERNAL HEIGHT (MM) | 370 | 560 | |
INTERNAL WIDTH (MM) | 280 | 435 | |
INTERNAL DEPTH (MM) | 150 | 175 |
Gas Meter Storage Fixing Kits 1 & 2
Allied Kiosks fixing kits are delivered fully assembled and tested. Available in two standard versions to suit customers requirements.
Product Attributes
Fix Kit 1 – comprising:
- Concentric reducer
- Valve
- Armoured pipe
- BSP connector
- Suitable washer for metre box adapter
Fit Kit 2 – comprising:
- Concentric reducer
- Armoured pipe
- BSP quick release coupling
- Suitable washer for metre box adapter
Product Benefits
- Supplied assembled
- Standard BSP male connector termination
- Are suitable for Newlog4 and Newlog4DR loggers
- For alternative bespoke kits contact us to discuss your requirements
Additional Elements:
- A suitable washer for the metre box adapter is supplied
Mechanical Data
MODEL | FIXKIT1 | FIXKIT2 |
OVERALL LENGTH (MM) | 400 | 400 |
Ready to speak to our Team? Tel: 01473 830030 Email: info@tex-engineering.co.uk
Part of the Tex Engineering group