Barter Burners - Manufacturing Excellence Since 2004

GAS BURNERS FOR A RANGE OF INDUSTRIES

Barters Insertajets and Insertabars

Ready to speak to our Team? Tel: 01473 830030 Email: info@tex-engineering.co.uk

Insertajets and Insertabars

Product Benefits

  • Simple system of tap in flame port tips for easy fabrication onto bar burners
  • Available in a range of five sizes
  • To be fitted in either 1,2 or 4 row patterns with the adjacent rows spaced 1/2″ to 2″ apart to suit the secondary air required to reach the inner rows of jets
  • Operates at any gas pressure with smooth cross ignition

Product Attributes

  • Flame runs along the length of the bar with gross heat release
  • Ratings per jet are varied by their centres and hole size of insertion
  • Relevant injectors must be chosen to provide the appropriate flame for your requirements

Design Procedure

  • To receive the heat release desired select one size of insertajet you propose to use and divide by total gross, this will give you the number of insertajets to be used
  • Calculate the number of insertajets per row by dividing the flame run of the bar by distance between centres of insertajets
  • Divide the total number of insertajets by the number of insertajets per row which will give you the number of rows required

Mechanical Data

Insertajet size Orifice dia. D (ins) Insertion port D (ins) Recommended Centres c (ins) Nom. Rating at 6”wg NG btu/hr
No. 00 0 0.234 0.5 50
No. 52 0.063 0.234 0.5 150
No. 35 0.110 0.234 0.5 350
No. 28 0.140 0.234 0.5 500
No.  8 0.198 0.343 0.625 1000

Ready to speak to our Team? Tel: 01473 830030 Email: info@tex-engineering.co.uk

Part of the Tex Engineering group

OUR ACCREDITATION