Ready to speak to our Team?
Tel: 01473 830030
Email: info@tex-engineering.co.uk
FR 1 BURNERS
FR 1 BURNERS
Product Benefits
- Cast iron flame-retention nozzle which is fitted with a mixing tube and injector
- Incorporates two stage air element to give a high degree of aeration
Product Attributes
- Air/gas ratio is automatically increased or reduced to suit the gas pressure with no use of mechanical aids
- Long cylindrical flame that burns with great stability
Optional Extras
- Spark plug is positioned so that the electrodes do not come into contact with the flame
- Gas hoses
- Rubber
- O/braided
- Flame failure system
- Manual (Piezo) ignition
- Auto temperature controls
- Regulators
- Also see Two Stage Injectors and Kiln Burner Sets
Mechanical Data
Injector |
Orifice |
Gas Rate in BTU/hr (Propane) | Flame length in inches | ||||
3 p.s.i | 10 p.s.i | 30 p.s.i | 3 p.s.i | 10 p.s.i | 30 p.s.i | ||
50 | 62M | 24400 | 44530 | 771100 | 16 | 20 | 22 |
75 | 54M | 51100 | 93300 | 161600 | 22 | 27 | 32 |
100 | 50M | 82750 | 151100 | 261700 | 26 | 31 | 36 |
125 | 45M | 113575 | 207350 | 359150 | 28 | 32 | 40 |
150 | 39M | 167200 | 305300 | 528800 | 30 | 40 | 48 |
200 | 32M | 227300 | 414950 | 718700 | 30 | 42 | 56 |
Additional Elements
- Stainless steel nozzle can be supplied at extra cost for high temperatures of up to 110 degrees centigrade
- Supplied calibrated to give the required heat release depending on pressure 1/2 to 30 PSI
- Available in Kiln burner sets to suit with flame failure protection and/or pressure gauge
Ready to speak to our Team? Tel: 01473 830030 Email: info@tex-engineering.co.uk
Part of the Tex Engineering group