Insertajets & Insertabars

Barters Burners - Gas Burners - Tex Engineering Divisions

SPEAK TO A MEMBER OF THE BARTERS TEAM

CONTACT US TODAY

Tex Engineering Limited
Unit 35, Claydon Business Park
Gipping Road
Gt Blakenham
Ipswich
Suffolk
IP6 ONL

01473 830030

Download PDF

Insertajets and Insertabars

Product Category:

Industrial Gas Burners ‘Barters’ – Insertajets and Insertabars

Product Benefits:

  • Simple system of tap in flame port tips for easy fabrication onto bar burners
  • Available in a range of five sizes
  • To be fitted in either 1,2 or 4 row patterns with the adjacent rows spaced 1/2″ to 2″ apart to suit the secondary air required to reach the inner rows of jets
  • Operates at any gas pressure with smooth cross ignition

Product Attributes:

  • Flame runs along the length of the bar with gross heat release
  • Ratings per jet are varied by their centres and hole size of insertion
  • Relevant injectors must be chosen to provide the appropriate flame for your requirements

Design Procedure:

  • To receive the heat release desired select one size of insertajet you propose to use and divide by total gross, this will give you the number of insertajets to be used
  • Calculate the number of insertajets per row by dividing the flame run of the bar by distance between centres of insertajets
  • Divide the total number of insertajets by the number of insertajets per row which will give you the number of rows required

Mechanical Data:

Insertajet size Orifice dia. D (ins) Insertion port D (ins) Recommended Centres c (ins) Nom. Rating at 6”wg NG btu/hr
No. 00 0 0.234 0.5 50
No. 52 0.063 0.234 0.5 150
No. 35 0.110 0.234 0.5 350
No. 28 0.140 0.234 0.5 500
No.  8 0.198 0.343 0.625 1000

 

Your Key Contact

For more information about our Industrial Gas Burners, please visit our Contact page and speak to a member of the Barters team:

Telephone: 01473 830030
Email: info@tex-engineering.co.uk

OUR DIVISIONS

OUR ACCREDITATION

Tex Engineering
Tex Engineering
Tex Engineering
Tex Engineering